Skip to main content

Glues

View as:
  • BSI: Insta-cure (1/2oz)(101)

    Bob Smith Industries

    BSI: Insta-cure (1/2oz)(101)

    $4.19

    Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the...

  • BSI: Insta-cure (2oz)(103)

    Bob Smith Industries

    BSI: Insta-cure (2oz)(103)

    $10.49

    Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the...

  • BSI: Insta-cure+ (1/2oz)(106)

    Bob Smith Industries

    BSI: Insta-cure+ (1/2oz)(106)

    $4.19

    Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface...

  • BSI: Insta-cure+ (2oz)(108)

    Bob Smith Industries

    BSI: Insta-cure+ (2oz)(108)

    $10.49

    Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface...

  • BSI: Insta-Set pump (2oz)(151)

    Bob Smith Industries

    BSI: Insta-Set pump (2oz)(151)

    $6.29

    INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from...

  • BSI: Maxi-cure (1/2oz)(111)

    Bob Smith Industries

    BSI: Maxi-cure (1/2oz)(111)

    $4.19

    Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids...

  • BSI: Maxi-cure (2oz)(113)

    Bob Smith Industries

    BSI: Maxi-cure (2oz)(113)

    $10.49

    Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids...

  • BSI: Plastic-cure (1/2oz)(105)

    Bob Smith Industries

    BSI: Plastic-cure (1/2oz)(105)

    $7.49

    Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use,...

  • BSI: Super-Gold (1/2oz)(121)

    Bob Smith Industries

    BSI: Super-Gold (1/2oz)(121)

    $9.29

    SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose...

  • BSI: Uncure (1oz)(161)

    Bob Smith Industries

    BSI: Uncure (1oz)(161)

    $4.19

    Ultra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure+ Gap Filling Medium. It is ideal for the mounting of rubber tires onto R/C car wheels. It is...